Let’s increase the sensors of IT agriculture 👨🌾
![](https://en.irori-lab.com/wp-content/uploads/sites/2/2021/05/image1-1-1.jpeg)
I used to get the sensor value from the field and send it by e-mail. At that time, the only data acquired was brightness and temperature. This time, I increased the number of sensors and tried to acquire more data.
The increased sensors are a hygrometer and a sensor that measures the amount of water in the soil. In addition, an LED display has been added so that the data results can be seen at hand.
![](https://en.irori-lab.com/wp-content/uploads/sites/2/2021/05/image2_2-1-1.jpeg)
It will be a part of the acquired data.
01:57:15.714 -> the light sensor value is 253
01:57:18.237 -> 湿度: 77.00% 温度: 27.00℃
01:57:22.273 -> the moisture value is 393
01:57:25.270 -> the light sensor value is 262
01:57:27.825 -> 湿度: 77.00% 温度: 27.00℃
01:57:31.874 -> the moisture value is 373
01:57:34.887 -> the light sensor value is 226
01:57:37.419 -> 湿度: 77.00% 温度: 27.00℃
02:03:19.570 -> the light sensor value is 187
02:03:22.110 -> 湿度: 79.00% 温度: 27.00℃
02:03:26.139 -> the moisture value is 1008
02:03:29.174 -> the light sensor value is 191
02:03:31.722 -> 湿度: 78.00% 温度: 27.00℃
02:03:35.720 -> the moisture value is 1010
02:03:38.763 -> the light sensor value is 188
02:03:41.292 -> 湿度: 78.00% 温度: 27.00℃
02:03:45.307 -> the moisture value is 1011
02:03:48.316 -> the light sensor value is 188
02:03:50.883 -> 湿度: 79.00% 温度: 27.00℃
02:03:54.914 -> the moisture value is 407
02:03:57.901 -> the light sensor value is 193
02:04:00.463 -> 湿度: 78.00% 温度: 27.00℃
02:04:04.504 -> the moisture value is 1008
This is the result of outputting the acquired data to the LED display. The display order is as follows.
Brightness (290) → Temperature (25) → Humidity (76) → Moisture in soil (919)
![](https://en.irori-lab.com/wp-content/uploads/sites/2/2021/05/movie2.gif)