Let’s increase the sensors of IT agriculture 👨🌾
I used to get the sensor value from the field and send it by e-mail. At that time, the only data acquired was brightness and temperature. This time, I increased the number of sensors and tried to acquire more data.
The increased sensors are a hygrometer and a sensor that measures the amount of water in the soil. In addition, an LED display has been added so that the data results can be seen at hand.
It will be a part of the acquired data.
01:57:15.714 -> the light sensor value is 253
01:57:18.237 -> 湿度: 77.00% 温度: 27.00℃
01:57:22.273 -> the moisture value is 393
01:57:25.270 -> the light sensor value is 262
01:57:27.825 -> 湿度: 77.00% 温度: 27.00℃
01:57:31.874 -> the moisture value is 373
01:57:34.887 -> the light sensor value is 226
01:57:37.419 -> 湿度: 77.00% 温度: 27.00℃
02:03:19.570 -> the light sensor value is 187
02:03:22.110 -> 湿度: 79.00% 温度: 27.00℃
02:03:26.139 -> the moisture value is 1008
02:03:29.174 -> the light sensor value is 191
02:03:31.722 -> 湿度: 78.00% 温度: 27.00℃
02:03:35.720 -> the moisture value is 1010
02:03:38.763 -> the light sensor value is 188
02:03:41.292 -> 湿度: 78.00% 温度: 27.00℃
02:03:45.307 -> the moisture value is 1011
02:03:48.316 -> the light sensor value is 188
02:03:50.883 -> 湿度: 79.00% 温度: 27.00℃
02:03:54.914 -> the moisture value is 407
02:03:57.901 -> the light sensor value is 193
02:04:00.463 -> 湿度: 78.00% 温度: 27.00℃
02:04:04.504 -> the moisture value is 1008
This is the result of outputting the acquired data to the LED display. The display order is as follows.
Brightness (290) → Temperature (25) → Humidity (76) → Moisture in soil (919)
